How To Restore Stock Firmware on Micromax Yu Yureka


In this tutorial, we will be guiding you through the process of reinstalling official firmware on Micromax Yu Yureka. We will show you how to restore original stock firmware on Yureka as well as unroot it in case you have already done that. Technically savvy users can simply do all these by running a simple script.


You might want to reinstall official firmware on your Micromax Yureka for various reasons. For instance, after rooting and trying out few custom ROMs, if you want to unroot your device, or if it stuck at boot loop after flashing a wrong ROM or whatever reasons your Yureka needs stock firmware.

For this tutorial, we use a simple script (flashtools) that will flash the factory images (CyanogenMod 11) on your Yureka, and at the same time, keep the bootloader status of your device as it was.

Disclaimer: Follow the guide carefully and at your own risk. We will not take any responsibility if anything went wrong. This guide is intended only for technically talented users.


– As this process wipes your device back every important files on your Yu Yureka
– This process requires unlocked bootloader (read here to know how to unlock the bootloader)
– Install proper driver for Yureka on your Windows PC

Instruction to restore stock firmware on Micromax Yureka

1. Download the flashtools [HERE] and stock firmware zip file from CyanogenMod [HERE]

2. Unzip the flashtools zip file (use 7 zip) in a new folder on your PC. Also, unzip the stock firmware zip file in the same folder.

3. Now, turn off your phone. Press the Volume Up key and at the same time connect your phone to your PC using a USB cable.

4. You should see the fastboot logo on your phone. If not, try it again.

5. Now, go to the folder where you extracted the flashtools and stock firmware and run the “flash-all.bat” by double clicking on it.


6. A command window will open and start the flashing process (Do not disconnect your phone from PC)

7. Once the process is completed, the command window will close automatically.

8. Disconnect your phone from PC and boot it. It will take up to 5 minutes for the first time.

You have now restored the stock firmware on your Yu Yureka. Enjoy! If you have any query regarding above procedure leave it in the comment section below.


  1. I have recently purchased micromax yureka yu,
    i rooted it successfully and used for a week,
    While tweaking cpu frequency level it was work perfectly for me. when i reboot my yureka it was not starded and handing on booting screen “cyanogen os”.

    Please solve my problem. please

    • The best solution is reinstaiing the stock firmware. Download the official firmware from CyanogenMod for Youreka and flash it.

  2. I flashed my yureka phone using flashtools and cm stock which I downloaded from your site.It was successfully done as shown instruction..
    After that, I booted my phone..but it happen so.
    So please suggest me what to do..

Comments are closed.